TCP to SLC 5/05 Gateway

Seamless data transfer between RAW TCP devices and RA PLCs

Support for CompactlLogix

An Optimized Solution for Transferring your Barcode and Scale data to a ControlLogix PLC

Reduce Your Investment by Networking multiple TCP devices with a single module

Transfer data from multiple TCP devices independently and simultaneously

Transfer data to multiple TCP devices independently and simultaneously

Support lots of devices with vastly different TCP data formats

Seamlessly Integrate your TCP devices with Rockwell Automation ControlLogix

No Lost Messages

Proven and reliable hardware platform

Transfer data with Little or No Latency

Quickly and Cost effectively integrate networks

No Software to Download or Code write

Simple Browser Based Configuration

490NBS

Move RAW TCP Data to and from the Tags of a SLC 5/05

The Fastest and Easiest Way to Move RAW TCP Data to an Allen Bradley SLC 5/05 Programmable Controller

For Immediate Information Call
1-800-249-1612
1-262-439-4999

	Specifications
	Dimensions
	Application Drawing

Smart SLC 5/05 Connection Solution for RAW TCP data

Let’s me be very honest. There are gaps in the Rockwell Automation architecture. Those gaps are designed to move you up their automation product line into higher performance higher cost products. You can’t blame them for this model but there’s no reason you can’t find an alternative way to ad performance without purchasing expressive rack solutions.

That’s where the 490NBS comes in.

With the 490NBS you can now quickly and easily connect TCP devices to your SLC 5/05 PLC. The 490NBS exists for one purpose and one purpose only; Move data between a number of TCP devices and a Compact Logix PLC. This means you will never have to deal with 30 additional features you don’t need. You wont have to search through a hundred page manual, or burn the midnight oil to set up this unit. The 490NBS is designed for a single purpose so that it can be quickly and easily be configured and deployed.

What Makes it so Simple to Use?

Your data transfer is configured via your internet browser. Simply log into your unit using an included discovery tool and you are ready to configure the unit with the web browser interface. You set the ip address of your TCP devices. You define the data that gets transferred and you pick the tag it should end up in the PLC. There is no software to download or code to futz with. It sounds simple, and it is, that’s the point.

The 490NBS is the smart connection solution for moving data from TCP devices to a SLC 5/05 PLC. Saving you money and increasing the abilities of the PLCs within your automation processes.

490NBS Data Flow Diagram

Ethernet Hardware Serial Communications LEDs Physical

32-Bit Motorola Coldfire Two DB-9M Connectors Link/Speed LEDs Dimensions: 4.2" x 3"

10/100 BaseT Baud Rate: up to 115.2k DATA LED Weight: 5oz

RJ45 Connector Even/Odd/No/Space Parity

One RS232 Serial Port Power Requirements Environmental

Network Interface One RS232/485 Port 12VDC @ 500ma 0-70 Degrees C

Ethernet TCP/IP 9-30VDC 5 to 90% Relative Humidity

Mounting Options

Configuration Din Rail

Browser Interface Panel

[Top]

Dimensions
435NBA Dimensions

Industrial Automation Data Sheets and Downloads

Request Industrial Automation Information

The Legend Begins
"It’s likely that your business isn't industrial networking. And it shouldn't be. You make products, products that do wonderful things. Whatever it is that you make the process creates data. If you're a control engineer and your plants been around for more than a few years your plant floor is probably littered with devices that send out all kinds of data, and in most case data talking in a lot of different protocols. If you're an automation device developer you probably need to move your data into some other network. Either way, you've got a device conversion problem. You have devices that generate ASCII data, Modbus RTU, Ethernet TCP Data, DeviceNet data or some completely proprietary data and now you're the guy that has to move that data to some other network!

I feel your pain… and better than my sympathy I have a solution for you. You see while your business isn't moving data around the factory floor mine is. In fact it is all we have done for more than twenty years now. Our 460 series of Device Converters line is the culmination of those twenty years. You can now move all of your data, where you want, when you want and how you want. Best of all THE HARDEST PART IS OPENING THE BOX".

-John Rinaldi

RTA , Inc. - The Industrial Networking Home for DeviceNet, EtherNet/IP, LonWorks,
Modbus TCP, Modbus RTU, PROFINET CBA, PROFINET IO, BACnet, IEC 61131-3,
IEEE 1588, AS-Interface, PROFIBUS, EtherCAT, CoDeSys and other networks.
© 2009 Real Time Automation, Inc.
www.rtaautomation.com