Modbus TCP Server to BACnet/IP Gateway

More Images

Fully Compliant BACnet/IP Server

Fully User Configurable Modbus TCP Server

BACnet/IP Supports Up to 150 Analog Input and 150 Analog Output Properties

Send and Receive up to 400 Modbus Registers

Support Modbus Function Codes 3, 6, and 16

Effortless Browser Based Configuration

10/100 BaseT Operation

Includes Ethernet Device Management Tool

No Programming Required

Eliminate Modbus TCP Legacy Device issues

Quickly and Cost effectively integrate networks

No Software to Download or Code to write

Simple Browser Based Configuration

460MSBS

Modbus TCP Client / BACnet/IP Client

The Fastest and Easiest Way to Move Data from Building Automation System to your Modbus TCP PLC/HMI/PC's

For Immediate Information Call
1-800-249-1612
1-262-439-4999

	Specifications
	Dimensions
	Application Drawing

Connect Your Modbus TCP Clients to Your Building Management System

The 460MSBS provides connectivity between a Modbus TCP Client device and a BACnet-enabled Building Automation Systems (BAS). The module provides the capability to move Modbus registers between a PLC controller, HMI or other Modbus TCP Client device and a BACnet/IP enabled Client device.

With the 460MSBS you have a device that you can quickly deploy and easily configure to integrate Modbus TCP Client into your BACnet/IP Building Automation System.

Move Your Data Bi-directionally

You can both send data to your Modbus TCP Enabled Controller, and read current status data. Data is mapped between the Modbus TCP device and BACnet using BACnet properties of Analog Input and Analog Output. Up to 150 Analog Inputs and 150 Analog Outputs can be mapped into the register set of the Modbus TCP Client device.

Configure Your Data Transfer from a Web Page

All the data transfer is configurable using the embedded web server. You define the number of BACnet/IP Analog Input and Output properties and RTA will map those properties into a block of Modbus Registers inside your Modbus TCP Client.

The 460MSBS is the Smart Connection solution for moving data from Modbus TCP enabled HMIs, Programmable Controllers to BACnet/IP enabled Client devices.

460MSBS

How Does It Work?

The products in the Instant Device Converter product line contain an IEC 61131-3 Control Engine that moves your data between the different network buffers. Input data from one network is moved to the output buffer of one or more other networks. The same principle applies to data moving in the opposite direction.

Because the unit features a Control Engine the transfer of data can be customized to meet your specific application requirements. Just call 1-800-249-1612 for details.

ENCLOSURE / HARDWARE
Size	4.2” x 3.25” x 1”
Weight	5 oz.
Enclosure Type	Anodized Aluminum
Mounting	Din Rail
Connectors	Port 0: T-Strip (RS232, RS485/RS422, CAN) Port 1: DB-9 (RS232, RS485/RS422, CAN) Only one RS232, RS485/RS422, or CAN port setting can be active per unit RJ45 10/100 Base-T (Ethernet) 2 Pin Barrel Connector
LEDs	Ethernet Link/Data, Ethernet Speed, Power, and two general purpose LEDs

ELECTRICAL/ENVIRONMENTAL/TOOLS
Network Interface	10/100 Base-T with RJ-45 Connector
Power	8 V @ 230 mA to 28 V @ 80 mA
Maximum Serial Baud Rate	115K Baud
Device IP Address Management	IPSetup™ — automatically locates RTA Instant Device Converters
Operating Temperature	-40 C to 80 C
Certification	RoHS-Compliant, UL, CUL, CE Approvals

Dimensions
460MSMM Dimensions

Industrial Automation Data Sheets and Downloads

Request Industrial Automation Information

The Legend Begins
"It’s likely that your business isn't industrial networking. And it shouldn't be. You make products, products that do wonderful things. Whatever it is that you make the process creates data. If you're a control engineer and your plants been around for more than a few years your plant floor is probably littered with devices that send out all kinds of data, and in most case data talking in a lot of different protocols. If you're an automation device developer you probably need to move your data into some other network. Either way, you've got a device conversion problem. You have devices that generate ASCII data, Modbus RTU, Ethernet TCP Data, DeviceNet data or some completely proprietary data and now you're the guy that has to move that data to some other network!

I feel your pain… and better than my sympathy I have a solution for you. You see while your business isn't moving data around the factory floor mine is. In fact it is all we have done for more than twenty years now. Our 460 series of Device Converters line is the culmination of those twenty years. You can now move all of your data, where you want, when you want and how you want. Best of all THE HARDEST PART IS OPENING THE BOX".

-John Rinaldi

RTA , Inc. - The Industrial Networking Home for DeviceNet, EtherNet/IP, LonWorks,
Modbus TCP, Modbus RTU, PROFINET CBA, PROFINET IO, BACnet, IEC 61131-3,
IEEE 1588, AS-Interface, PROFIBUS, EtherCAT, CoDeSys and other networks.
© 2009 Real Time Automation, Inc.
www.rtaautomation.com