Ethernet TCP / Modbus RTU Master Gateway

More Images

Perfect for Devices that output Ethernet TCP data

Directly map Ethernet TCP data to Modbus RTU Registers

Modbus RTU Master Support for Function Code 3, 6, and 16

Supports up to 10 Ethernet TCP devices

Effortless Browser Based Configuration

10/100 BaseT Operation

Includes Ethernet Device Management Tool

No Programming Required

Eliminate Ethernet TCP Legacy Device issues

Quickly and Cost effectively integrate networks

No Software to Download or Code to write

Simple Browser Based Configuration

460MRSTCP

Modbus RTU Master / Ethernet TCP

The Fastest and Easiest Way to Move Ethernet TCP Data to a Modbus RTU PLC, HMI, or Controller

For Immediate Information Call
1-800-249-1612
1-262-439-4999

	Specifications
	Dimensions
	Application Drawing

Get Ethernet TCP Data Into Your Modbus RTU PLC or HMI

The 460MRSTCP moves data between Ethernet TCP devices and a Modbus RTU Master. There are thousands of Ethernet TCP devices in automation systems. These devices include weigh scales, drives, barcode readers and sensors of every type imaginable.

With the 460MRSTCP you have a device that you can quickly deploy and easily configure to access and integrate these Ethernet TCP devices into your Modbus RTU network.

Turn Your Ethernet TCP Data Into a Set of Modbus RTU Master Registers

Now, with the 460MRSTCP you can capture all sorts of Ethernet TCP data as Modbus RTU Master Registers and easily bring it into your PLC, HMI, or PC based Modbus RTU Master device. See your barcode, weigh data or measurement data as a series of consecutive Modbus Registers.

Move Your Data Bi-directionally

Your Modbus RTU Master device can both send and receive Ethernet TCP data from a devices like barcode reader or weigh scale. Up to 194 Bytes of Ethernet TCP data can be transferred.

Configure Your Data Transfer from a Web Page

All the data transfer is configurable using the embedded web server. You define the Modbus RTU Master device address and the register sets used to transfer the Ethernet TCP data in and out of the module. There is no software to download or code to futz with. It sounds simple, and it is; that's the point.

The 460MRSTCP is the Smart Connection solution for moving data between Ethernet TCP devices and a Modbus RTU Master.

460MRSTCP

How Does It Work?

The products in the Instant Device Converter product line contain an IEC 61131-3 Control Engine that moves your data between the different network buffers. Input data from one network is moved to the output buffer of one or more other networks. The same principle applies to data moving in the opposite direction.

Because the unit features a Control Engine the transfer of data can be customized to meet your specific application requirements. Just call 1-800-249-1612 for details.

ENCLOSURE / HARDWARE

Size 4.2” x 3.25” x 1”

Weight 5 oz.

Enclosure Type Anodized Aluminum

Mounting Din Rail

Connectors
Port 0: T-Strip (RS232, RS485/RS422, CAN)
Port 1: DB-9 (RS232, RS485/RS422, CAN)
**Only one RS232, RS485/RS422, or CAN port setting can be active per unit**
RJ45 10/100 Base-T (Ethernet)
2 Pin Barrel Connector

LEDs Ethernet Link/Data, Ethernet Speed, Power, and two general purpose LEDs

ELECTRICAL/ENVIRONMENTAL/TOOLS

Network Interface 10/100 Base-T with RJ-45 Connector

Power 8 V @ 230 mA to 28 V @ 80 mA

Maximum Serial Baud Rate 115K Baud

Device IP Address Management IPSetup™ — automatically locates RTA Instant Device Converters

Operating Temperature -40 C to 80 C

Certification RoHS-Compliant, UL, CUL, CE Approvals

Dimensions

Industrial Automation Data Sheets and Downloads

Request Industrial Automation Information

The Legend Begins
"It’s likely that your business isn't industrial networking. And it shouldn't be. You make products, products that do wonderful things. Whatever it is that you make the process creates data. If you're a control engineer and your plants been around for more than a few years your plant floor is probably littered with devices that send out all kinds of data, and in most case data talking in a lot of different protocols. If you're an automation device developer you probably need to move your data into some other network. Either way, you've got a device conversion problem. You have devices that generate ASCII data, Modbus RTU, Ethernet TCP Data, DeviceNet data or some completely proprietary data and now you're the guy that has to move that data to some other network!

I feel your pain… and better than my sympathy I have a solution for you. You see while your business isn't moving data around the factory floor mine is. In fact it is all we have done for more than twenty years now. Our 460 series of Device Converters line is the culmination of those twenty years. You can now move all of your data, where you want, when you want and how you want. Best of all THE HARDEST PART IS OPENING THE BOX".

-John Rinaldi

RTA , Inc. - The Industrial Networking Home for DeviceNet, EtherNet/IP, LonWorks,
Modbus TCP, Modbus RTU, PROFINET CBA, PROFINET IO, BACnet, IEC 61131-3,
IEEE 1588, AS-Interface, PROFIBUS, EtherCAT, CoDeSys and other networks.
© 2009 Real Time Automation, Inc.
www.rtaautomation.com