TCP ethernet / DeviceNet Master Gateway

More Images

Perfect for Devices that output Raw TCP data

Fully Compliant DeviceNet Slave

Bi-directional Handshaking Protocol Avoids Data Loss

Support for up to 10 TCP Devices

DeviceNet Supports Up to 200 Bytes of Input Data

DeviceNet Supports Up to 200 Bytes of Output Data

Configurable TCP Message Size

Effortless Browser Based Configuration

10/100 BaseT Operation

Includes Ethernet Device Management Tool

No Programming Required

Eliminate Raw TCP Legacy Device issues

Quickly and Cost effectively integrate networks

No Software to Download or Code to write

Simple Browser Based Configuration

460DSTCP

DeviceNet Master / Ethernet TCP

The Fastest and Easiest Way to Move Ethernet TCP Data to a DeviceNet PLC, HMI, or Controller

For Immediate Information Call
1-800-249-1612
1-262-439-4999

	Specifications
	Dimensions
	Application Drawing

Get Raw TCP Data Into Your DeviceNet Network

The 460DSTCP moves data between EtherNet TCP devices and a DeviceNet Master. There are thousands of devices in automation systems that put out or recive Ethernet TCP data. These devices include weigh scales, barcode readers, printers and numeric displays every type imaginable.

With the 460DSTCP you have a device that you can quickly deploy and easily configure to access and integrate these Raw TCP devices into your DeviceNet network.

Turn Your Ethernet TCP Data Into DeviceNet Slave Data

Now, with the 460DSTCP you can capture all sorts of Raw TCP data as DeviceNet Slave data and easily bring it into your DeviceNet Master device. See your barcode, weigh data or measurement data as DevciceNet data. Our send messages from your DeviceNet controller to a printer or display.

Move Your Data Bi-directionally

Your DeviceNet Master device can both get Raw TCP data from input devices like barcode readers and weigh scales and send it an ouput devices like printers and displays.

Configure Your Data Transfer from a Web Page

All the data transfer is configurable using the embedded web server. You define the DeviceNet Slave device address and the register set used to transfer the Raw TCP data in and out of the module.

The 460DSTCP is the Smart Connection solution for moving data between Raw TCP devices and a DeviceNet Master.

460DSTCP

How Does It Work?

The products in the Instant Device Converter product line contain an IEC 61131-3 Control Engine that moves your data between the different network buffers. Input data from one network is moved to the output buffer of one or more other networks. The same principle applies to data moving in the opposite direction.

Because the unit features a Control Engine the transfer of data can be customized to meet your specific application requirements. Just call 1-800-249-1612 for details.

ENCLOSURE / HARDWARE

Size 4.2” x 3.25” x 1”

Weight 5 oz.

Enclosure Type Anodized Aluminum

Mounting Din Rail

Connectors
Port 0: T-Strip (RS232, RS485/RS422, CAN)
Port 1: DB-9 (RS232, RS485/RS422, CAN)
**Only one RS232, RS485/RS422, or CAN port setting can be active per unit**
RJ45 10/100 Base-T (Ethernet)
2 Pin Barrel Connector

LEDs Ethernet Link/Data, Ethernet Speed, Power, and two general purpose LEDs

ELECTRICAL/ENVIRONMENTAL/TOOLS

Network Interface 10/100 Base-T with RJ-45 Connector

Power 8 V @ 230 mA to 28 V @ 80 mA

Maximum Serial Baud Rate 115K Baud

Device IP Address Management IPSetup™ — automatically locates RTA Instant Device Converters

Operating Temperature -40 C to 80 C

Certification RoHS-Compliant, UL, CUL, CE Approvals

Dimensions

Industrial Automation Data Sheets and Downloads

Request Industrial Automation Information

The Legend Begins
"It’s likely that your business isn't industrial networking. And it shouldn't be. You make products, products that do wonderful things. Whatever it is that you make the process creates data. If you're a control engineer and your plants been around for more than a few years your plant floor is probably littered with devices that send out all kinds of data, and in most case data talking in a lot of different protocols. If you're an automation device developer you probably need to move your data into some other network. Either way, you've got a device conversion problem. You have devices that generate ASCII data, Modbus RTU, Ethernet TCP Data, DeviceNet data or some completely proprietary data and now you're the guy that has to move that data to some other network!

I feel your pain… and better than my sympathy I have a solution for you. You see while your business isn't moving data around the factory floor mine is. In fact it is all we have done for more than twenty years now. Our 460 series of Device Converters line is the culmination of those twenty years. You can now move all of your data, where you want, when you want and how you want. Best of all THE HARDEST PART IS OPENING THE BOX".

-John Rinaldi

RTA , Inc. - The Industrial Networking Home for DeviceNet, EtherNet/IP, LonWorks,
Modbus TCP, Modbus RTU, PROFINET CBA, PROFINET IO, BACnet, IEC 61131-3,
IEEE 1588, AS-Interface, PROFIBUS, EtherCAT, CoDeSys and other networks.
© 2009 Real Time Automation, Inc.
www.rtaautomation.com