EtherNet/IP for Eaton IQ 150 Power Meters

The Easiest Way to Move Eaton IQ 150 Data to EtherNet/IP

Get Your IQ 150 Power Meter Data on EtherNet/IP
The 460MXE moves power and energy data between one or more IQ 150 Power Meters and EtherNet/IP Scanners like an Allen-Bradley PLC. With Energy costs rising there is increased concern about energy and power quality. More and more building managers need access to the real time energy and power data collected by Eaton IQ Meters. Managers want to access that data over EtherNet/IP and get it in their PLC’s. The 460MXE is perfect for this task. In fact, it’s been designed solely to move data from IQ Meters to an EtherNet/IP system.

With the 460MXE you have a device that can be quickly deployed and easily configured to integrate Eaton IQ 150 Power Meters into EtherNet/IP.

No Nasty Configuration Headaches
The 460MXE comes pre-programmed ready to be integrated. A user editable profile automatically maps Eaton IQ 150 Modbus registers to EtherNet/IP assemblies. You simply select the Modbus address for each Eaton IQ 150 Meter. If your application requires additional Eaton IQ 150 Registers you can simply edit and reload the profile to access other Eaton IQ 150 data points. In Most Apps There’s No Need To Look At The Eaton IQ 150 Register List!

Move Your Data Bi-directionally
You can both receive energy data from your IQ 150 Power Meter and send new control parameters to the Meter from your EtherNet/IP Scanner.

Configure Your Data Transfer from a Web Page
No special software is required. The unit is completely configurable using an internet Browser.



  • 120 volt AC Wall Wart Power Supply
  • Manual
  • 6’ power cable with Flying leads
  • 5 Year Hardware Warranty
  • IPSetup software — Automatically locates RTA Gateway on the network
  • Unlimited Firmware Feature Upgrades for Life
  • CAT5 Cross over cable for direct connection to PC during programming
  • Complete, Unlimited Access to our Industry Leading Support Staff

Modbus RTU

Modbus RTU Master Features

Modbus Operation Modes
Modbus RTU Master

Function Codes Supported

1,2,3,4,5,6,15 & 16

Byte and Word Swapping

Maximum Modbus RTU Slave Devices

Number Read/Write Scan Lines per RTU Slave Device
200 Total - 100 reads & 100 writes

Scan Line Support
Up to 125 Registers or 512 Coils


Ethernet/IP Adapter Features

Operation Modes
EtherNet/IP Adapter

Message Support
Implicit, Explicit UCMM

Data Types
BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double

Maximum EtherNet/IP Scanner Devices
Up to 10

Max Data Per Adapter Connection
Up to 480 bytes in each direction


Electrical / Environmental

DC Input Voltage
24 VDC @ 125 mA
Maximum Baud Rate
115K Baud
Operating Temperature
-40 C to 85 C
RoHS-Compliant, UL, CUL, CE Approvals, Class 1 Div 2

Enclosure / Hardware

4.2” x 3.25” x 1”
5 oz.
Enclosure Type
Anodized Aluminum
Din Rail or Panel Mount
Ethernet Link/Data LED, Ethernet Speed LED, Power LED, & 2 general purpose LEDS on side


Gateway Security

You can configure up to 9 different users access to diagnostic and configuration screens.


Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table

Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters

Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page

Allows users to see and log start up sequences, protocol specific messages & error messages.